VOOPOO applies unprecedentedly craftsmanship to the brand new Drag mini Platinum. With the same advanced GENE.Fit chip used in DRAG 2, DRAG mini Platinum is more reliable than you have ever imagined. The innovative FIT mode, brings both security and convenience to vapors. DRAG mini Platinum is small in size, but FIT from the inside out.
15Months Spent in R&D
11MData Mining of GENE Chips
161Tanks Tested
Apart from the innovation in its brain, GENE.Fit chip is secured by a V0 class
fireproofing bridge to
block dust, liquid or burnout.
FIT for DRAG
mini
Our vision has always been to create the device that is of high performance, long
endurance
and best protection for vapors. FIT for DRAG mini Platinum, can bring better using
experience
with its safety design and long battery life, as well as protect tanks from burnout.
With the equivalent power of 2 18650 batteries,
DRAG mini is almost TWICE as
strong in battery life
comparing to similar devices.
palm-friendly design
For a better portable experience,
DRAG mini Platinum is compact in
structure,
ergonomic in shaping and
powerful in battery life.
DRAG mini Platinum kit
unique resin plates
DRAG mini Platinum is employed with solid specular finishing, with multiple resin plates to choose from.
-
Platinum-Purple
-
Platinum-Rhodonite
-
Platinum-Phthalo
-
Platinum-Atrovirens
-
Platinum-Coral
-
Platinum-Lava
-
Platinum-Lame
-
Platinum-Prussian Blue
With an 117W output to the most, DRAG mini Platinum reaches a balance between high
power
and slim body.
- UFORCE P2
- Even massive heating
- Rich and strong flavor
- Type: Single mesh coil
- Resistance: 0.6Ω
- Power: 24-28W
- UFORCE N1
- Single mesh coil
- Well-distributed heating area
- Type: Single mesh coil
- Resistance: 0.13Ω
- Power: 50-100W
- Best: 70-80W
P2 & N1 mesh coils included (U2&N1 TPD)
Compatible with all UFORCE coils (P2 not compatible with TPD version of UFORCE T2)
With exotic appearance and exquisite structure, the idea of UFORCE T2 comes from the mechanical design of the TRANSFORMER. Equipped with P2 (U2 instead for TPD), and N1 coils, DRAG mini Platinum kit is remarkable for its rich flavors and acceleration power.
Compatible with all UFORCE coils :
*P2 is not compatible with TPD version of UFORCE T2.
The tank is compatible with all of the glass tubes(2ml / 3.5ml / 5ml / 5.5ml / 8ml).
- 2ML(TPD)
- 3.5ML
- 5ML
- 5.5ML
- 8ML
-
![drag mini platinum kit]()
90mm DRAGDimensions: 90*54*24mm
Weight: 204(±2)g
Battery: 2*18650
Max Range: 157W
-
![drag mini platinum kit]()
81.5mm DRAG mini
PlatinumDimensions: 81.5*48.5*25.5mm
Weight: 178(±2)g
Battery: 4400mAh (Built-in Battery)
Max Range: 117W
-
![drag mini platinum kit]()
88.3mm DRAG 2
PlatinumDimensions: 88.3*51*26.5mm
Weight: 158(±2)g
Battery: 2*18650
Max Range: 177W
-
Switch Timeout Protection
Intelligent overtime protection will avoid
atomizer's coil and cotton burning. -
Over-temperature Protection
TC mode assures the mod and battery work
properly within safe temperature range. -
Output Over-current Protection
To Intelligently detect output current, and close the
output current when the current exceeds the
highest limit. -
Overcharge Protection
With dedicated lithium battery protection
components, the battery will be protected
against battery overcharge and damage. -
Over discharge Protection
With dedicated lithium battery protection
components, the battery will be protected
against battery discharge and harm. -
Short-circuit Protection
When the short-circuit is detected, the mod will
protect the battery by preventing the circuit
returning. -
Support Balance charge
With dedicated firmware to detect internal
resistance of battery, it will be protected in a
balanced charging condition.
It can effectively prevent e-juice leakage by pushing the top cap and filling in e-liquid, which is more convenient and clean
- Hold the atomizer with your left hand push the top
cap with your right hand and move it - Add e-liquid through the slot,and pay attention
to check how much oil is filled in the tank
(suggest not lower than the MIN line) - Gently push back the top cap,then let the atomizer
stands for 5 minutes to get the organic
cotton completely saturated
Appearance
| Specification |
Name Material Power Range Battery Voltage Output Current Output Quiescent Current Resistance Range TC Range |
Drag mini Platinum Mod Tungsten Alloy, Resin 5-117W Built-in Battery (4400mAh) 0-7.5V 0-30A ≤10uA 0.05-5.0Ω 200-600℉/100-315℃ |
|
| Protection Functions |
Vape Overtime Protection Over Temperature Protection Over Current Output Protection Overcharge Protection Over Discharge Protection Tank Short-circuit Protection Support Balance Charge Protection |
||
| Size of the Tank |
Height Diameter Weight |
Nearly 54.45mm (TPD: 49.95mm) Nearly 28mm (TPD: 24.6mm) About 59.2g (TPD: 59.1g)
|
|
| Size of the Mod |
Length Height Width Weight |
Nearly 48.5mm Nearly 81.5mm Nearly 25.5mm About 178g |
|
| Tank Parameters |
Material Capacity |
Stainless Steel 5ml (TPD: 2ml) |
|
| Coil Settings |
Standard Version Coils Type Resistance Power Range Best Power Range |
UFORCE P2 (Pre-install) Single Mesh 0.6Ω 24-28W - |
UFORCE N1 Single Mesh 0.13Ω 50-100W 70-80W |
|
TPD Version Coils Type Resistance Power Range Best Power Range |
UFORCE U2 (Pre-install) Dual Coil 0.4Ω 40-80W 55-65W |
UFORCE N1 Single Mesh 0.13Ω 50-100W 70-80W |
|
| Package List |
Standard Version Drag mini Platinum Mod *1 UFORCE T2 Tank *1 UFORCE P2 Coil *1 UFORCE N1 Coil *1 Glass Tube (3.5ml)*1 USB Cable *1 GENE Chip Card *1 User Manual *2 Warranty Card *1 |
TPD Version Drag mini Platinum Mod *1 UFORCE T2 Tank *1 UFORCE U2 Coil *1 UFORCE N1 Coil *1 Glass Tube (2ml)*1 USB Cable *1 GENE Chip Card *1 User Manual *2 Warranty Card *1 |
