rimfire雾化器产品详情

This RTA, is a sturdy tank with a user-friendly and highly-detachable structure: from
premium leak-proof and adjustable air-insulation deck, easy-to-build Single/dual coils,
to misoperation-free left hand thread.

rimfire雾化器产品详情-顶部进气 避免漏油

Center (air down): air goes down directly from top to coils

Side (air up): air travels through two side cavities before getting up into the
build deck

Top airflow

Adjustable e-liquid segregation: after vaping, you can simply “shut
down the gate” to segregate the liquid from both cotton and fresh air

Full-size build deck is easy to build with all
kinds of coils.

Left hand thread is designed ONLY for the
chamber, to prevent the misoperation in
assembling/disassembling in one direction.

Compared to threading cap, clip-on top cap is
much easier.

Resin 810 drip tip

Gold-plated 510 pin

  • 1 Open up the screws
  • 2 Cut the coil lead,make sure the coil lead has 1cm length
  • 3 Install the coil vertically,and tighten the screws
  • 4 Adjust your coil right into the airflow hole
  • 5 Fire up the coil make it heating at the same time
  • 6 Wick the cotton,cut the cotton tail make it only has 1cm length
  • 7 Drip some juice and screw the whole atomizer
  • 8 Done
  • Name: RIMFIRE
  • Capacity: Standard 5ml / TPD 2ml
  • Dimensions: Standard Φ30*46.3MM
    TPD Φ26*46.3MM
  • Resistance: DIY
  • Thread: 510
  • Airflow Adjustable: Top
  • Fill Liquid: Top
  • Material: Stainless steel
  • Weight: 84(±2)g
  • RIMFIRE RTA(5ml) x 1
  • Glass Tube (5ml) x 1
  • Seal Ring x 13
  • Slotted Screw x 4
  • Coil x 2
  • Organic Cotton x 1
  • Multi-function screwdriver x 1
  • UserManual x 1
  • RIMFIRE RTA(2ml) x 1
  • Glass Tube (2ml) x 1
  • Seal Ring x 13
  • Slotted Screw x 4
  • Coil x 2
  • Organic Cotton x 1
  • Multi-function screwdriver x 1
  • UserManual x 1
HOME> TANKS&COILS> RTA> RIMFIRE RTA
RIMFIRE RTA